| Customization: | Available |
|---|---|
| After-sales Service: | Installation Service, Online Service or Turn-Key |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
No. |
Name | Describe | Function | Quantity |
| 1 | Miller | Real power:20kw Motor power:22kw Installed power:22kw Size:5000x700x1100mm Output:1000kg/h |
Mill the raw material into powder. | 1 |
| 2 | Vertical Mixer (WBFJ-I) | Size:1800*1350*2050(mm) Real power: 2kw Motor power:2.2kw+0.75kw Installed power: 2.95kw 100-150kg/one time(6-7minutes) |
1,Raw material with water, liquid chemical additive mix together fully 2,This part that contacts mixer to material adopts the stainless steel material. 3,The discharge hole adopts the new handle-opened design good seal 4,The frame is iron, the part which contact raw material is ss201 |
1 |
| 3 | Screw conveyor (SL-II) |
Size:2500x800x2300(mm) Real power: 2kw Motor:2.2kw Installed power: 2.2kw Output: 500kg/h |
1,Auger delivery inside. Delivering material of mixer to the feeding inlet of the twin screw extruder 2,This part that contacts material adopts the stainless steel material and advanced surface spraying .It avoids the material pollution and equipment cohering |
1 |
| 4 | Extruder (with conditioner) |
Size:4665x995x2700 Real power: 75kw Motor power:75kw Heating: 20kw Installed power: 100kw Steam Only: 80kw Output: 500-800kg/h |
1. The diameter of the screws is 85mm. 2. The cabinet control the extruder. 3. The twin-screw extruder has the conditioner, feeder, extruder, cutter, heating system,gearbox and cabinet. 4. The inverter is used to control the speed of the extruder. The main motor is the specific type motor. It is free to replace the main motor if it is burned naturally. 5. Enforcement lubrication system. If the oil pump does not start, the extruder can not start either. To avoid the machine running without oil. 6. Different area temperature can be controlled by different valve. 7. The dies can be changed to produce the different products 8. The screws can clean themselves without taking them out of the extruder. 9. The conditioner is single-shaft conditioner. The material is SS. |
1 |
| 5 | Air conveyor (FS-II) |
Size:2200x1100x3500(mm) Motor: 2.2kw High Pressure Fan |
1. Air conveyor conveys the food relying on the wind-force from the blower. It is more suitable for the long distance conveying 2, Low energy-consumption, high efficiency 3. No leaking material and no pollution when the food is conveyed in the sealed stainless steel pipeline 4, The material is ss201 |
1 |
| 6 | Oven (KX-5-8) |
Size:8000x1900x2800(mm) Motor:3kw Circulating fan:28kw Exhaust fan:2.2kw Heating: 66kw Installed Power:95.7kw Electricity Only: 69kw Steam Only: 33.2kw Vapor pressure: more than 0.4mpa Output: 500kg/h |
1. Combined with oven and cabinet. 2. The material is SS. 3. The oven structure is compact and the size is small. The drying area is big and the radiating area is small which leads the high heating efficiency. 4. Double pitch roller chain and sprocket drive. Running smoothly. 5. Insulation board material is SS. 6. Tunnel drying. The speed of the belt can be adjusted to control the products drying time in the oven. The temperature also can be adjusted by temperature control device. 7. The steam heating cycling. Heating and cooling rapidly. 8. Five level conveyor belt. 9. The inverter control the speed of belt. 10. The doors can be opened to clean the residual material inside. 11. The oven is equipped with heat pipes which can use electricity for heating. |
1 |
| 7 | Flavoring Device | Conveyor Model:TS-II Power:1.85kw Size:1500x800x1700mm |
1. The flavoring device combine with conveyor, single roller and oil sprayer. 2. The conveyor delivers the dry products to the single roller. Different kind of flavor will be sprayed on the products by oil sprayer. 3. The liquid sprayed by oil sprayer is mist to make sure the flavor distribute on the products evenly. 4. In order to avoid leaking material, the conveyor is widened. The screw conveyor is used to feed the products evenly. 5. The single roller material is SS. Stir teeth are used to stir the products inside the single roller. |
1 |
| Single Roller Model:DGT-I Power:0.75kw Size:2800x1000x1700mm |
1 | |||
| Oil Sprayer Model:PY-II Power:3.75kw Size:1000x600x1800mm |
1 | |||
| 8 | Sifter (ZDS-D) |
Size:1300x800x900(mm) Real power: 0.25kw Installed power: 0.2kw |
1,The sifter shakes to separate the food pellet 2, Material touching the food is stainless steel |
1 |
| 9 | Air conveyor (FS-II) |
Size:2200x1100x3500(mm) Motor: 2.2kw High Pressure Fan |
1. Air conveyor conveys the food relying on the wind-force from the blower. It is more suitable for the long distance conveying 2, Low energy-consumption, high efficiency 12. No leaking material and no pollution when the food is conveyed in the sealed stainless steel pipeline 4, The material is ss201 |
1 |
| 10 | Cooling machine | Size:5200x1200x1800mm Motor: 2.23kw |
1. The cooling machine has three levels. 2. Four cooling fans at the bottom. 3. The net belt has two level. The top level is fine belt. 4. The speed of the cooling machines controlled by the inverter. |
1 |
){kind=link}